As a quality driven organization, our sole aim is to serve clients in an ethical and transparent way by manufacturing and supplying Hard Coatings. These coatings are applied on plastics to prevent them from being heated. Our expert professionals use the finest grade compounds which we source from the most authentic vendors, to formulate these Hard Coatings. Our quality analysts check these coatings on certain quality parameters including purity and effectiveness, before offering the clients at reasonable price.
HCR - 2 is a specially designed Resin System which makes a hard film cored thermally. The coating gives mar resistance, water repellency, surface slipperiness and antifouling properties. It is mainly applied for protective coatings on the plastic
- Typical application is done using 'Dip" method The Film thickness could be between 1 3 micron. The Object is dried at 90 - 100 C in Oven for 30-45 minutes to get the Hard Film.
- Alternately, Spray Application also could be used.
- The hardness Produced is govern by
- The proper Drying of the Film
- The Film Thickness.
The coating done by HCR - I passes the Cross Cut Test / Adhesion and also gives Antifouling properties with High Contact Angle with water.
The information and recommendations presented here wete compiled with the utmost care, but cannot be extended to cover every possible case. They are intended to serve as non-binding guidelines and must be adapted to the prevailing conditions